Good News:Buy One Give One Free!
Buy Digtal iRock Give SH-300 Portable Lee Hardness Tester Free.
Digital iRock DR1 Function:
● A kind of Full-auto Intelligent Digital Rockwell Hardness Tester, available to test Rockwell and Superficial Rockwell hardness automatically.
● One-key operation, auto lifting, auto load-change, auto loading/dwell/unloading,auto conversion, auto testing.
● Equipped with friendly operation interface, 5.2“ color touch screen directly display test force, dwell time,conversion value, indenter type, etc.
● Auto calculating and displaying test result, Max, Min, Ave, and hardness deviation. Resolution is 0.1HR.
● Available to set up upper and lower limit, with the function of over-error warning, data analysis chart,single test and group test.
● With software compensation function, available to compensate ±3HR, need not mechanical adjustment.
● With function of auto conversion according to ASTM E140, without checking hardness contrast table.
● Available to switch languages:Chinese,English,German,Portuguese,Turkish,Czech
● Available to save 2000 single test results and 1000 group test results. Can realize data viewing and analysis
● With optional wireless Bluetooth printer, there is no need to record results and report by hand.
● With optional data analysis software and Bluetooth receiver to input and analyze data.
● Support FexQMS data analysis and control software, improve integral control and decrease material consumption.
SH-300 Portable Lee Hardness Tester
Product Name | Portable Leeb Hardness Tester |
Model | SH-300 |
Code# | #852-130 |
Measuring Range | (170-960)HLD,(17-68.5)HRC,(19-651)HB,(80-976)HV, (30-100)HS,(59-85)HRA(13 -100)HRB |
Measuring Direction | 0~360° |
Memory | 500 Groups test maximum |
Printer | Built-in Printer |
Hardness Scale | HL、HBW、HRB、HRC、HRA、HV、HS |
Shell Material | Plastic |
Statistics | Average value, min-max ,upper-lower limits |
Indicating Error | HLD:±5HRC:±1 HB:±4 |
Data-Output | RS-232 |
Impact Device | D (standard) |
Optional impact Devices | DC/D+15/DL/G/C/E |
Work piece radius (convex/concave) | Rmin=50mm(with support ring Rmin=10mm) |
Min. Workpiece weight | 2~5kg on stable support 0.05~2kg with compact coupling except C and G impact device |
Workpiece min. thickness couple | D:5mm, G:10mm,C:1mm |
Workpiece min. case hardened depth | D:0.08mm C: 0.2mm G:1.2mm |
Power Supply | AA/6V |
Operating Temperature | 0 ℃-40 ℃ |
Dimension | 212mm×72mm×30mm |
Weight | 280g(Excluding impact device and printer) |
Contact Person: Mr. Marshall Zheng
Tel: 86-769-23184144
Fax: 86-769-22854144